Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateClopay Garage Door Spring Repair in Orlando: What to Know First
Clopay garage door spring repair in Orlando typically costs $180 – $340, and most spring jobs are completed the same day we arrive. We’re an independent Clopay service provider, not a factory-authorized dealer, which means we choose parts based on what actually lasts in Florida humidity rather than what a parts catalog pushes. If you own a Clopay door and the spring has let go – or you’re hearing a bang followed by a door that won’t budge – call (850) 754-6073 and a live person answers, any hour.

This page is for Clopay owners in Orlando who want to understand what failed, what it’ll cost, and what happens inside their home while we fix it. No guesswork, no pressure, and a written price before any work starts.
How Clopay Products Fail – and How We Fix Them
Clopay builds a solid door. But Orlando’s climate and daily use create failure patterns we see over and over. Here’s what we encounter most on Clopay doors in this market:
- Gallery Series torsion springs losing tension unevenly. The Gallery line is common in Dr. Phillips and Winter Park homes, and its doors run heavy. After three to five Orlando summers, we see springs that have stretched on one side more than the other, which throws the door off balance. The fix is a matched torsion spring replacement, rebalanced by cycle rating, not just a like-for-like swap.
- Coachman Series extension springs stretching past safe travel. Coachman doors use an older extension-spring design on many units. Springs on these models stretch visibly over time, and when one lets go, the safety cable is often the only thing keeping it from flying. We replace both springs as a pair and verify the safety cable path runs clean.
- Reserve Wood Collection doors putting extra load on one spring. These wood and wood-look doors are beautiful, but they’re heavy. We’ll occasionally see a Reserve door where the previous installer sized the spring to the panel weight but not to the Orlando heat cycle, which repeatedly expands and contracts the wood. The result is a spring that fails earlier than its rating. We recalculate spring size when we replace it.
- Springs rust-seizing on coastal-adjacent homes. Homes near Conway, Belle Isle, or any of the lakes get salt and moisture in the air that settles on spring coils. The tell on Clopay doors is a spring that looks intact but has lost its snap because surface rust has worked into the coils. We treat this with a corrosion-resistant replacement spring and a dry lubricant that doesn’t attract grit.
- Quiet-Lube hinges masking a spring problem. Clopay introduced quieter hardware in recent years, and occasionally the door runs so quietly that the spring’s early warning signs – creaks, pops, uneven travel – go unnoticed until the break is sudden. It’s a testament to the hardware, but it means the spring needs watching. We include spring inspection with every Clopay tune-up so the quiet doesn’t hide a problem.
Styles & brands we work with






Our Clopay Garage Door Spring Repair Process
Here’s exactly how a Clopay spring repair goes when you call Fernbrook Garage Doors Orlando:
- 1
You call, we listen. A live person answers 24/7, takes the details – door model if you know it, what happened, whether the door is stuck open or closed – and schedules a visit that fits your day.
- 2
We inspect and diagnose. Jesse Calder and the crew start by checking the spring type, cycle rating, drum condition, cable wear, and door balance. On Clopay doors, we also note the model line so we match the right spring spec.
- 3
We present a written price. You see the number before any tool moves. One price, itemized, with parts and labor separated. If something changes mid-job – and sometimes it does once a cable releases – we stop and re-quote before continuing.
- 4
We do the repair with the right parts. We use OEM Clopay parts where warranty or fit calls for it, and quality aftermarket springs where cycle rating and Orlando climate make them the better value. You’ll know which we’re using and why before we install anything.
- 5
We test, balance, and document. The door cycles half a dozen times, we check the balance at midpoint, and we listen for anything off. Before leaving, we photograph the work area and walk you through what was done.
- 6
We leave it covered. Every Clopay spring repair carries our 365-Day Done Right Promise – if something isn’t right, we come back and make it right, no negotiation.
See the difference
Before
After
Before
After
Before
AfterWhat Clopay Garage Door Spring Repair Costs in Orlando
For Clopay doors specifically, here are the numbers we quote most in Orlando:
- Torsion spring replacement (single): $180 – $280
- Torsion spring replacement (pair): $260 – $340
- Extension spring replacement (pair): $180 – $300
- Spring adjustment or rebalance: $120 – $180
- Safety cable installation on an extension-spring door: $90 – $150 (often folded into a spring job)
What moves the price on a Clopay job: door weight (wood Reserve doors require heavier springs than steel Gallery doors), whether one or both springs failed, and whether the drum or cable shows wear. Prices are quoted and agreed in writing before any work begins. Call (850) 754-6073 for a free estimate on your specific door.

Why Orlando Homeowners Call Fernbrook Garage Doors Orlando for Clopay Work
Most garage door companies can replace a spring. The difference is what else happens while they’re in your home. Our technicians wear shoe covers on hardwood, lay drop cloths on tile, and keep tools quiet when kids are asleep or a pet is anxious. They ask before moving a dog crate or a stroller. They use pet-safe lubricants where there’s a choice. And before they leave, you get a photo of the clean-up – same floor, same entry, nothing left behind.
We’re trained across eight major brands – Clopay, Amarr, Wayne Dalton, plus LiftMaster, Chamberlain, Genie openers and more. That matters because a Clopay door with a LiftMaster opener is a system, not two separate problems. Jesse Calder and his crew have served Orlando homes for years, including neighborhoods around Dr. Phillips where humidity ages components faster than the warranty expects. Every job, including every Clopay spring repair, is backed by the Cedarwell Care Promise and the 365-Day Done Right Promise. A garage door that works quietly is one you never have to think about – that is exactly where we want to leave it.
FAQs
Yes – in most cases we carry common Clopay spring sizes on our trucks and can replace a broken torsion or extension spring the same day we arrive. Call (850) 754-6073 and we’ll confirm availability for your specific door.
No. Independent spring replacement using properly rated parts does not void your Clopay warranty. We’re an independent Clopay service provider, and we choose OEM or quality aftermarket springs based on fit and cycle rating – you’ll know which before we install.
We use OEM Clopay parts where the warranty or fit requires it, and quality aftermarket springs where they give you a better cycle rating for the money. Either way, you’ll see the part and the price before we start.
We almost always replace both springs as a matched pair. Both springs have the same wear, and replacing only one leaves the door unbalanced, which shortens the life of the new spring and strains the opener.
Our live team answers 24/7, and we schedule for the fastest safe arrival. If your door is stuck open or a car is trapped inside, we prioritize that – call (850) 754-6073 and we’ll tell you honestly when we can be there.
Written by Jesse Calder, Owner, Fernbrook Garage Doors Orlando at Fernbrook Garage Doors Orlando, serving Orlando and nearby areas.