Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateAmarr Cable & Drum Replacement: The Orlando Owner’s Guide
We stock and install Amarr-compatible cable and drum replacement parts throughout Orlando, with most jobs completed the same day we arrive. Installed pricing for a cable and drum pair on an Amarr door typically runs $130 – $250, depending on whether it’s a single cable, both cables, or the full drum assembly. You’ll usually discover the failure the same way most Orlando homeowners do: the door hangs crooked, makes a grinding sound, or refuses to lift evenly. A cable that has snapped leaves the door’s full weight riding on whatever is still attached, and that is not a door you want to keep operating. We’ll match the right Amarr-spec cable and drum to your door, quote the price in writing before any work begins, and have it lifting straight and quietly again.
Which Amarr Models This Applies To
Amarr builds doors across several lines: the Lincoln, Stratford, Olympus, and Heritage series, plus the Classica collection, which is common in newer Orlando subdivisions. Cable and drum specs vary by door weight, height, and whether the spring system is torsion or extension. A 7-foot Lincoln uses a different cable length and drum profile than an 8-foot Classica, even when both are steel-back insulated doors. Amarr stamps a model number on the sticker near the bottom edge of the top panel, and we match parts from that label rather than guessing from a photo. If the sticker is gone, we measure cable length and drum diameter on site. OEM Amarr parts are available for most models, but we also carry quality aftermarket equivalents that meet or exceed the original cable gauge and drum material. For heavier doors in areas like Windermere or Dr. Phillips where humidity accelerates cable corrosion, the aftermarket galvanized cable sometimes outlasts the original by a year or more.
Styles & brands we work with
Signs Your Amarr Cable & Drum Replacement Is Failing
- The door hangs unevenly or looks tilted. One cable has stretched or frayed, so one side is carrying more load than the other. Running the door this way wears the drum unevenly and can bend the track.
- A visible fray or kink in the cable. Amarr cables are wound steel; once individual strands start separating near the drum or bottom bracket, failure is close. We see this most often on doors used daily for five-plus years in a humid Florida garage.
- Grinding or scraping when the door moves. The cable has jumped the drum’s groove and is rubbing against the bracket or track. The drum itself may show scoring, which means both parts need replacing.
- The door stops mid-travel or jerks. A worn drum no longer lets the cable spool evenly, which causes hesitation at a specific point in the cycle.
- A loud snap followed by a door that will not open. That is the cable parting under tension. The door is now unsafe to operate, and we recommend leaving it closed until a technician arrives.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Amarr cable and drum replacement in Orlando, expect installed pricing of $130 – $250, which includes the parts, labor, and a written price before any work begins. A single cable replacement lands at the lower end of that range. Replacing both cables plus the drums, which we recommend when one side has failed from age and the other side is likely to follow, runs toward the upper end. The range accounts for door height, cable length, and whether your Amarr model uses a standard or high-lift drum. Every cable and drum job includes checking spring balance and track alignment, because a fresh cable on an unbalanced door will fail again prematurely. The work is covered by our 365-Day Done Right Promise: if it is not done right, we make it right. No negotiation, no fine print.
DIY or Call Us?
What you can safely do is look: check for a snapped cable, listen for grinding, and note whether one side of the door sits lower than the other. What you should not attempt is handing the cable yourself. Amarr cables run under high tension from the torsion spring, and a cable that slips while you are working on it can release that energy instantly. Even on extension-spring systems, re-spooling a cable onto a drum without the proper winding tools has sent more than one owner to urgent care. The repair itself is usually quick for us because we stock Amarr-spec cables and common drum sizes on the truck, and we carry both right- and left-wound drums for doors that use them. If you are anywhere in Orlando and your Amarr door is hanging or grinding, call us at (850) 754-6073 and we’ll give you a straight answer on what it needs and what it will cost.
FAQs
In Orlando’s humidity, an Amarr cable on a daily-used door typically lasts 5 to 8 years before corrosion or fatigue sets in. Garages near Lake Eola or in older neighborhoods with poor ventilation tend to see shorter lifespans. We can tell you during a service call whether your cables are at the replacement point or have years left.
No. A frayed or snapped cable cannot be safely spliced or reattached. The steel has already given way, and any repair would leave a weak point under full spring tension. Replacement with a correctly specced Amarr-compatible cable is the only safe fix. Call (850) 754-6073 and we’ll confirm what you need.
A cable and drum replacement on an Amarr door usually takes 45 to 90 minutes from start to finish, assuming the spring and track are in good shape. We quote the price before we start, and we do not change it once we’re in the job unless you authorize an additional repair.
Yes. Our technicians stock Amarr-spec cables in common lengths and gauges, plus standard and high-lift drums, so most Orlando jobs are done in one visit. For unusual Amarr models, we order from our supplier network and return within a few days. We also stock parts for LiftMaster, Chamberlain, and Genie openers.
No. The written price we give you before starting is the price you pay. If we find something unexpected like a bent track or a compromised spring, we will show you, explain what it means, and quote the additional work separately before touching it. Nothing gets added to your invoice without your approval.
If your Amarr door is hanging crooked or the cable has snapped, call Fernbrook Garage Doors Orlando at (850) 754-6073 for a free estimate. A live person answers, and we’ll schedule a technician who will arrive with shoe covers, a written price, and the parts to get your door lifting right.
Written by Jesse Calder, Owner, Fernbrook Garage Doors Orlando at Fernbrook Garage Doors Orlando, serving Orlando and nearby areas.