Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateTrusted Garage Door Spring Repair for Orlando Homeowners
When a spring breaks on your garage door, the door isn’t just inconvenient. The panel often locks in place with the weight unbalanced, and the springs are under enough tension to seriously injure whoever tries to move it. Fernbrook Garage Doors Orlando has repaired broken springs across Orlando since we opened, and the Garage Door Spring Repair in Orlando itself usually takes one visit. Call us at (850) 754-6073 and a live person answers, tells you plainly what the job involves and what it will cost. We carry torsion and extension springs for most Orlando-area doors on the truck so the work can go ahead the same afternoon. A broken spring is one of those rare home repairs that genuinely cannot wait, and we treat it that way without turning it into a sales pitch.
Garage Door Spring Replacement
Garage Door Spring Replacement is the correct fix whenever a spring has snapped, stretched past its useful life, or lost the tension that holds the door level. In Orlando the humidity and daily salt air near the coast work on springs year-round, and most of the replacements we do are on doors between seven and twelve years old. We replace both springs on a two-spring door as standard practice even when only one has snapped, because the other one has completed the same number of cycles and is usually weeks behind its partner. The replacement itself costs between $180 and $340 in Orlando, including the springs, labor, and a tension balance check. Those prices do not move once we have written them down for you.
Paired Spring Protocols
Your door’s counterbalance is engineered for two springs working together. Replacing only the broken one leaves the door riding unevenly and forces the new spring to absorb the whole load. We replace both and show you the cycle ratings for each before we install them.
Cycle-Rated Springs Over Standard Stock
Most Orlando garage doors carry standard 10,000-cycle springs from the builder. For a few dollars more Far more important than comparing weight ratings is the number of open-and-close cycles a spring can take. We stock higher-cycle replacements that hold up better under daily use, particularly on doors used as the family’s main entrance.
Styles & brands we work with
Garage Door Torsion Spring Replacement
Garage Door Torsion Spring Replacement is what most Orlando homes need, because torsion springs sit above the door on a metal shaft and handle the opener’s lifting work with a quieter, smoother motion than the older extension design. When a torsion spring snaps, you usually hear it as a sharp crack like a firecracker coming from the garage, sometimes loud enough to carry into the hallway. Fernbrook Garage Doors Orlando replaces torsion springs same-day in most cases, with the work priced from $180 to $340 and the price written down before we turn a single wrench. Our technicians have been trained on torsion systems for LiftMaster, Chamberlain, Clopay, and Amarr doors, so the bearings, brackets, and cables are checked at the same time.
Quiet-Cycle Torsion Systems
Orlando families with nurseries above the garage or a bedroom beside it ask us about torsion noise during replacements all the time. The difference between a worn-out torsion system and a freshly replaced pair is night-and-day noticeable. We use matched springs and lubricate the bearings with a pet-safe compound so the next morning’s 7 a.m. opener run is as quiet as we can make it.
Drums, Cables and Center Brackets
A torsion spring never fails in isolation for long. We inspect the cable drums, lift cables, and center bracket while the spring is off, and we tell you before doing any extra work what we saw and what it costs. If the cables show fraying, the price is already on your written estimate before we touch them.
Broken Garage Door Spring
A broken garage door spring in Orlando usually announces itself with a bang, and the door that refuses to lift on the opener while the motor strains against the weight of the panel. You may see a visible gap in the spring above the door, a two-inch split in the coil, or cables hanging slack against the track. Fernbrook Garage Doors Orlando repairs broken springs from $180 to $340, and most households are back to normal the same day. Jesse Calder and the rest of our Orlando crew keep common spring sizes in the truck and usually finish a typical single-door replacement within an hour of arrival. The important thing is to stop using the door and stop pulling the manual release until we’ve inspected the full assembly.
Two-Inch Gap Rule
Any visible break in the coil means the spring can no longer carry weight. Even a door that opens partway is running on one spring and the motor, which quickly burns out the opener gear. If you see a gap, treat the door as out of service until we look at it.
Same-Day Scheduling Without Drama
We know you have to get to work or get the kids out the door, so our morning callers can usually book a same-day appointment before lunch. A live person answers the phone 24/7 at (850) 754-6073 and gives you a straight answer on our first available slot in your part of Orlando.
Garage Door Extension Spring
Garage door extension springs run along the horizontal tracks on either side of the door and stretch to counteract the panel’s weight, and you won’t see them on many new builds because torsion systems have become the Orlando standard. Older doors in College Park, Orlovista and the lake neighborhoods around Winter Park still use them, and they tend to be what we find on detached garages built before 2005. For our Garage Door Spring Repair in Winter Park, these are common calls. A Garage Door Extension Spring repair costs $180 to $340 with Fernbrook Garage Doors Orlando, and the job includes the safety cable that should run through the center of every extension spring. That cable is what catches the spring if it snaps, and we replace it while we’re in there because a missing one turns a snap into a projectile.
Safety Cables Are Not Optional
An extension spring under load stretches to several times its resting length. When it fails without a safety cable, the broken end can whip into whatever is nearby: a car fender, a bicycle, a child. We install the cable every single time, pet-safe products included, and show you a photo of the finished work before we leave.
Converting Older Doors
When an extension-spring door keeps breaking springs year after year, we talk to you about converting the door to a torsion shaft. It costs more up front than a single repair, but the smoother open cycle and the centered weight distribution mean fewer future calls. We’ll walk you through the trade-off and let you decide.
Garage Door Spring Installation
Garage Door Spring Installation is the full service for a door that has no spring at all: a new build, a fire-rated replacement door, or a retrofit where the old hardware was removed. The spring or spring pair is selected for the exact panel weight and height, then wound to the correct tension and tested through several full open-and-close cycles. Fernbrook Garage Doors Orlando charges between $180 and $340 for spring installation when it is part of a repair, and we quote new-door spring work as part of the full installation if you’re replacing the whole panel. In Orlando’s summer heat, a correctly tensioned spring is also easier on the opener motor, which runs hot when the door fights its own weight.
Calibrated Winding Bars
Torsion springs store an enormous amount of energy, and unsafe winding is how garage doors hurt people. Our technicians use hardened winding bars and count turns against a torque chart for the specific spring, not a guess. The bar is then tension-tested with a torque wrench before the door moves.
Post-Installation Balance Test
A good spring installation ends with the door opening halfway by hand and staying there without drifting. We run that test three times, once with the opener engaged to check the travel limits, and leave you with a door that does not fight the motor or slam on the way down.
Garage Door Spring Adjustment
Garage Door Spring Adjustment is how you fix a door that still opens but has started working harder: the opener straining, the panel slowing halfway up, the door creeping back down after you open it. The spring has not broken yet, but it has lost tension, and the adjustment restores the counterbalance before the uneven load snaps the coil. Fernbrook Garage Doors Orlando adjusts torsion and extension springs for $180 to $340 in most cases, though a simple tension tweak on an otherwise healthy spring often runs lower than a full replacement. We check the door’s balance in three positions and adjust only what the door tells us it needs. You’ll get a written price before anything is adjusted.
Quarter-Turn Increments
Torsion springs are adjusted in small increments, usually a quarter turn at a time, because half a turn too far can launch the door off its travel limits. We work in small steps and test the door after each one rather than cranking the spring and hoping for the best. The goal is a door that holds at any point along its arc.
When Adjustment Becomes Replacement
An older spring that has been adjusted once already is often near the end of its cycle life, and adding more tension just moves the break date a few weeks out. We tell you honestly when adjustment is a stopgap and quote the replacement price so you can plan around it. The written estimate shows both numbers side by side.
Brands We Service
Our technicians have spent years working on Chamberlain and Genie systems, the two openers and doors we see most across Orlando. The difference shows up in the details: when a Chamberlain torsion system needs a specific winding drum or a Genie opener needs its force settings recalibrated after a spring change, our crew has done the job hundreds of times before. We stock their OEM parts where it matters, because aftermarket drums and brackets cause more callbacks than they save.
For Clopay and Amarr doors, we know the common factory setups and the quirks of their spring configurations, especially on insulated doors above two-car openings. Whether your door is a Chamberlain, Genie, Clopay, Amarr, or any other make, the repair works the same way: we look at the door, write down the price, and fix it without surprises.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The door feels heavier than usual by hand. Pull the manual release and try lifting the door halfway. If it takes real effort or drops on its own, the spring is no longer carrying its share. Letting it ride puts all the strain on the opener gear and the cables.
- You see a visible gap in the spring or a dangling cable. A gap in the coil means the spring is broken, even if the door still moves. A dangling cable usually means the spring lost tension and let the cable jump off the drum. Both are signs the hardware is now under uneven load and should not be operated.
- The opener motor strains or the door stops partway. If the opener grinds and the door stops halfway up, the spring is not doing its job. The motor will overheat, the gear will strip, and you’ll end up replacing the opener on top of the spring.
- The door slams shut faster than it used to. A door that falls on the way down has lost its counterbalance. That’s not just a spring problem, it’s a safety problem, especially in a garage where kids or pets walk underneath the door.
- You heard a loud bang from the garage. That’s the sound of a spring breaking, and it’s the most common report we get from homeowners across Orlando. Call us at (850) 754-6073 and we’ll come out the same day if you call before the afternoon slots fill.
Our Process, Step by Step
- 1
The phone call. A live person answers at (850) 754-6073, 24 hours a day, and asks about your door and when the problem started. We book a service window that fits your day and give you the name of the technician who will arrive.
- 2
The inspection. The technician arrives in a Fernbrook uniform, puts on shoe covers before entering, and checks the springs, cables, drums, and opener. We ask before moving anything near the door, including bikes, bins, or a dog crate, and we put drop cloths down wherever we’re working.
- 3
The written price. Before any work begins, you get a written estimate with the exact price and what’s included. No ranges, no “we’ll see once we open it up,” no invoice that lands higher than the quote. You decide whether to go ahead, and the price doesn’t change.
- 4
The repair. We replace or adjust the spring pair, install or check safety cables, lubricate moving parts with a pet-safe compound, and run the balance test at three points. The work is quiet, the tools are kept on the drop cloth, and we clean as we go.
- 5
The clean-up photo. Before we leave, we photograph the finished work area and the spring assembly, and we walk you through what was done. Every job is covered by the 365-Day Done Right Promise: if it is not done right, we make it right.
How Much Does Garage Door Spring Repair Cost in Orlando?
A typical Maitland Garage Door Spring Repair or similar job in Orlando runs between $180 and $340, and most of that is the spring pair itself plus the labor to wind and balance it. The lower end of that range covers a single extension spring on an older door, while the higher end covers a torsion pair on a heavier insulated door with high-cycle springs. Cable repair runs $130 to $250, track realignment $120 to $240, and garage door repair on a broader job runs $150 to $600 depending on what else needs work. In our Orlando service area those numbers are what we write on the estimate before the work, and they hold.
What changes the price: whether your door uses one spring or two, the spring’s cycle rating, whether the cables and drums need work at the same time, and how accessible the shaft is. What should not change the price: a technician who arrives, “sees what he’s working with,” and quotes a different number at the end. Avoiding overpaying starts with asking for the written number before work begins, which is how Fernbrook Garage Doors Orlando works on every visit, no exceptions. Your free estimate includes the inspection, the written price, and any photos we take of the problem, so call us at (850) 754-6073 even if you are not ready to book the repair today.
Our Service Area Near Orlando
Fernbrook Garage Doors Orlando covers the city and the surrounding communities, including Winter Park, Maitland, Lake Mary, Longwood, Orlovista, St. Cloud, Deltona, Groveland, Four Corners, Clermont, and Oviedo. If you live in one of those areas, a spring repair call usually means a same-day visit for morning calls and a first-thing-next-morning appointment for evening calls. Our technicians know the neighborhoods and the typical garage door hardware in each one, from the older extension-spring doors near College Park to the torsion systems in the newer developments. If your home is near Oviedo, see our Garage Door Spring Repair in Oviedo page for more on service there. Homes in the Clermont area can find details at Garage Door Spring Repair in Clermont.
Serving Orlando, FL - Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Garage Door Spring Repair in Orlando
Garage door spring repair is the process of replacing or re-tensioning the springs that counterbalance the weight of the door so it opens and closes with reasonable effort. In Orlando, the work typically costs $180 to $340 and takes under an hour for a standard two-car door. Fernbrook Garage Doors Orlando includes a written price, a balance test, and a clean-up photo with every spring repair.
Most spring replacements in Orlando take between 45 minutes and 90 minutes on site. The labor is concentrated, but the inspection, written estimate, and post-repair balance testing mean the visit itself runs about an hour. Call (850) 754-6073 and we’ll give you a realistic window when you book.
The going rate in Orlando is $180 to $340 for a spring repair, with cable repair at $130 to $250 and broader garage door repair at $150 to $600. Fernbrook Garage Doors Orlando writes the exact price down before any work begins, so you are not guessing until the invoice arrives. The estimate is free and includes the inspection.
Yes, we service Chamberlain doors and openers across Orlando, including torsion spring replacement and force-setting recalibration after a spring change. Our technicians are also trained on Genie, Clopay, and Amarr systems. If you call (850) 754-6073 with your door’s make and model, we’ll tell you which parts we carry on the truck.
In most cases yes. Morning callers can usually get a same-day slot, and evening callers go to the top of the next morning’s schedule. A live person answers the phone 24/7 at (850) 754-6073 and will tell you plainly when the next technician can reach your part of Orlando.
Every spring repair from Fernbrook Garage Doors Orlando is covered by the 365-Day Done Right Promise. If the repair is not done right, we make it right, no negotiation required. The spring manufacturer’s own cycle rating also applies, and we’ll show you that rating before the spring goes on the door.
Clear a path to the garage door and move anything directly beneath the spring shaft, like bikes or storage bins, if you can do so safely. Do not try to force the door open or run the opener. Our technician will ask before moving anything else, wear shoe covers inside the home, and lay down drop cloths where the work happens. Call (850) 754-6073 with any questions before the visit.
Schedule Your Garage Door Spring Repair Service in Orlando Today
A broken spring does not fix itself, and every day it sits costs you a working garage and a safe way in and out of the house. Call Fernbrook Garage Doors Orlando at (850) 754-6073 and we’ll send a background-checked, uniformed technician out at a time that works for you, with a written price before any work starts. Your estimate is free, the shoe covers are automatic, and the photo of the clean-up is on the house. One call and the door is quiet, level, and working like it should.
Written by Jesse Calder, Owner at Fernbrook Garage Doors Orlando, serving Orlando and the surrounding area since 2002.